538 - Microrip assembly

We are aware of the problems that might occur before, during and after fire interventions. You might be too hot before the intervention to begin with and it could be harder to evacuate perspiration efficiently. To solve those problems, we have created a light, resistant and very breathable assembly. It has a level two thermal protection.

Our solution with a RET < 9 m².Pa/w is rare in the market. After all, the lower the RET, the more breathable the fabric.

Layers

Outer fabric Microrip Sioguard

98% aramid + 2% AST; ± 230 g/m²

Our Microrip Sioguard is an outer fabric that was designed to provide an optimal protection for firemen during their different missions. It is developed and produced in France according to a strict protocol and it also complies with the ÖEKO-TEX^® 100 standard, which confirms that the product does not contain any harmful substances that pose a threat to human health.

Its mechanical characteristics are 3 times better than the demands of the EN 469 standard. The original weaving of the material offers an excellent breathability and a high abrasion resistance. The garment has an excellent wash fastness throughout its entire life.

The Microrip Sioguard today protects several thousands of fireman throughout Europe. Its reliability does not need to be proved anymore and its breathability offers an excellent comfort. .

The Microrip Sioguard is available in different colours: navy, yellow, orange and red.

Thermal barrier Quilted ISO’AIR^® on techical 3D fabric

98% aramid + 2% AST; ± 230g/m²

The thermal barrier ISO’AIR^® is the result of two years of research that delivered a light, flexible and breathable product.

ISO’AIR^® is a fire and heat resistant, non-woven fabric manufactured with virgin fibres. Its hydrophobic treatment and its excellent breathability make it a major component of our assembly. In addition, the ISO'AIR^® constitutes an incompressible space between the lining and the exterior of the jacket and protects the fireman from burns in all circumstances. Thanks to its air capsules it is superior to other felts.

To fit in with the other layers of your protection we have quilted it with our technical 3D fabric. The lining of a jacket is often considered to be the poor relation of the assembly. We, on the other hand, think that it is every bit as important as the other layers. It is in direct contact with the skin and has to bear a lot of mechanical stress. The lining cannot retain moisture and plays an important role in the protection of the jacket. That is why we created this technical 3D fabric, which has a very airy structure thanks to a specific weaving technique.