Assembly: 538 - Microrip

As the region is located in Southern France, close to the Spanish border, temperatures are often quite high. That is why they require increased breathability. After many trials the choice was made to equip the firefighters with a suit without a membrane. In addition, they wanted garments that comply with the EN ISO 20471 high visibility standard with the least possible striping.

538 Microrip - Jacket SDIS 66

Material assembly 538 - Microrip

We are aware of the problems that might occur before, during and after fire interventions. You might be too hot before the intervention to begin with and it could be harder to evacuate perspiration efficiently. To solve those problems, we have created a light, resistant and very breathable assembly. It has a level two thermal protection.

Our solution with a RET < 9 m².Pa/w is rare in the market. After all, the lower the RET, the more breathable the fabric.

  1. Microrip Sioguard
  2. Quilted ISO’AIR® on techical 3D fabric
Read more

Technical specifications

Firefighter jacket
Reference: 1VBSF1PYM

This long jacket has a fluorescent shoulder bib and retroreflective striping with yellow prisms. The microprismatic technology that is used offers a retroreflection that is three times stronger than that of a striping with glass beads in rainy weather.


  • Collar with flap with touch and close fastening
  • Anti-panic zipper under flap with touch & close fastening
  • 2 inset pockets with touch & close fastening
  • Touch and close fastening (square 5cm x 5cm) for gradient
  • 1 Napoleon pocket
  • Ergonomic sleeves with gusset
  • Sleeve narrowing by touch and close fastening
  • Shoulder reinforcement with foam and elbow reinforcement
  • H-striping + 2 stripes on each sleeve
  • Jacket with detachable chest flap
  • Reflective and hi-vis striping (50mm) + ath the bottom detachable tape with touch and close fastening
  • Fixed quilted lining
  • Knitted cuffs in sleeves with thumbhole
  • 1 inside pocket with zip closure
  • Zipper in back lining for inspection
  • Wickingstrip at sleeve end and at hem

Certified to

  • EN 1149-5 : 2018
  • EN ISO 20471 : 2013 +A1 2016 / Class 2 (with detachable chestflap)
  • EN 469 : 2005 + A1 : 2006 / Xf2 Xr2 Y1 Z2
  • EN ISO 13688 : 2013
More about certification

Firefighter trousers
Reference: 1V1SF1PYM

These over trousers have adjustable and removable braces. The knees are reinforced with coated and cut resistant Kevlar® and foam. Thanks to the openings on the side of the lower legs, you can put your trousers on and off easily and they fit over your boots.


  • Front fly with zip closure under flap + touch and close fastening + fixed by an adjustable hook and 2 eyelets
  • Side opening up until waist with zip closure under flap with touch and close fastening
  • Elasticated waist
  • Adjustable and removable braces
  • Knees reinforced with foam and coated and cut resistant Kevlar®

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1 : 2006 / Xf1 Xr1 Y1 Z2 (in combination with TSI 50% aramid 50% viscose FR 260 g/m²)
  • EN ISO 13688 : 2013
More about certification

Are you interested in a similar suit?

Our team of experts can provide you with personalised advice. Contact our Sioen Fire team to find out more about the possibilities.

Similar fire suits