Indre-et-Loire

Assembly: 529 - Microrip

The department has a very busy road transport network. When doing interventions on roads, or near roads, high visibility is really crucial. That is why the department wanted a solution that complies with the EN 469 / EN ISO 20471 standard. A retroreflective striping with yellow prisms was our answer. For this firefighter suit, the 529 complex was chosen. It combines excellent lightweight protection with good mechanical resistance.

529T Microrip - Jacket SDIS 37

Material assembly 529 - Microrip

Our 529 Microrip assembly is waterproof, breathable, light and very resistant. It perfectly combines a good mechanical resistance with an excellent light-weight protection.

  1. Microrip Sioguard
  2. ISO’AIR®
  3. SioLiner Plus
Read more

Technical specifications

Firefighter jacket
Reference: 1V2GF0PYM

The classical long jacket complies with the high visibility standard. It is the only striping on the market that is both yellow fluorescent and retroreflective on the whole surface. The striping offers a retroreflection that is three times stronger than that of a striping with glass beads in rainy weather.

Details

  • Collar with flap with touch and close fastening
  • Anti-panic zipper under flap with touch & close fastening
  • 2 inset pockets with touch & close fastening and loop under flap
  • Touch and close fastening (square 5cm x 5cm) for gradient
  • Ergonomic sleeves with gusset
  • Sleeve narrowing by touch and close fastening
  • Shoulder reinforcement with foam and elbow reinforcement
  • Reflective and hi-vis striping (50mm)
  • Jacket with detachable chest flap
  • Flame retardant reflective & hi-vis striping (50mm)
  • Fixed aramid lining with PU coating
  • Knitted cuffs in sleeves with thumbhole
  • 1 inside pocket with zip closure
  • Zipper in back lining for inspection
  • Air tubes top back for additional air-layer

Certified to

  • EN 1149-5 : 2008
  • EN ISO 20471 : 2013 / Class 2 with detachable chestflap
  • EN 469 : 2005 + A1: 2006 / Xf2 Xr2 Y2 Z2
  • EN ISO 13688 : 2013
More about certification

Firefighter overtrousers
Reference: 1VUPF0PYM

These normal waist trousers are over-trousers that need undergarments. The braces are adjustable and removable. The openings on the side of the lower legs improve the ergonomics. The trousers can be put on and off more easily. In addition, they reduces heat stress. Another improvement are the reinforced knees with coated and cut resistant Kevlar® and foam.

Details

  • 2 patched thigh pockets with flap with touch and close fastening and gusset
  • Detachable braces
  • Knee reinforcement with foam
  • Side opening at leg seam with zipper under flap and touch and close fastening
  • Elasticated waist
  • 1 retroreflective yellow fluorescent stripe around each leg
  • Flame retardant reflective & hi-vis striping (50mm)
  • Fixed aramid lining with PU coating
  • Wickingstrip at bottom of trousers

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1: 2006 / Xf2 Xr2 Y2 Z2
  • EN ISO 13688 : 2013
More about certification

Are you interested in a similar suit?

Our team of experts can provide you with personalised advice. Contact our Sioen Fire team to find out more about the possibilities.

Similar fire suits