Assembly: 529 - Microrip

Several French departments have chosen the same design for their firefighter suits. For these garments, the reliable 529 Microrip complex was used, which provides very good protection and breathability. This suit is the response to a high quality requirement for Protective Clothing and Equipment for Firefighters (VEPSP) established by ASQUAL and DGSCGC.

Material assembly 529 - Microrip

Our 529 Microrip assembly is waterproof, breathable, light and very resistant. It perfectly combines a good mechanical resistance with an excellent light-weight protection.

  1. Microrip Sioguard
  2. ISO’AIR®
  3. SioLiner Plus
Read more

Technical specifications

Available in stock

Firefighter jacket
Reference: 1V1GC2PYM

This jacket is equipped with two inside pockets, reinforced shoulders. The confection of the suit is reinforced by the double safety stitches. In accordance with the EN 469 standard, the suit has a triple yellow/grey striping on the front and back. The yellow fluorescent part improves visibility by day, while the silver retroreflective part reflects the light from cars by night. The raglan sleeves add to the comfort of the suit.


  • Collar with flap with touch and close fastening
  • Anti-panic zipper under flap with touch & close fastening
  • 2 inset pockets with touch & close fastening + reinforcement at the bottom of the pockets
  • Touch and close fastening (square 5cm x 5cm) for gradient
  • 1 Napoleon pocket with zipper under front flap
  • Ergonomic sleeves with gusset
  • Sleeve narrowing by touch and close fastening
  • Shoulder reinforcement with foam
  • Reflective and hi-vis striping (50mm) + at the bottom detachable tape with touch and close fastening
  • Fixed aramid lining with PU coating
  • Knitted cuffs in sleeves with thumb loop
  • 1 inside pocket closed by zipper for storing wallet
  • Zipper in back lining for inspection
  • Wickingstrip at sleeve end and at hem

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1: 2006 / Xf2 Xr2 Y2 Z2
  • EN ISO 13688 : 2013
More about certification
Available in stock

Firefighter trousers
Reference: 1V1QC2PYM

These single layered over-trousers have reinforced knees. Those are cut-resistant and include a shock absorbing foam. The braces are adjustable and removable. The openings on the sides of the lower legs facilitate putting your boots on. The same double safety stitches are used as in the jacket


  • Front fly with zip closure under flap + touch and close fastening + fixed by an adjustable hook and 2 eyelets
  • Knee reinforcement with foam
  • Side opening at leg seam with zipper under flap and touch and close fastening
  • Elasticated waist
  • Adjustable and removable braces

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1 : 2006 / Xf1 Xr1 Y1 Z2 (in combination with TSI 50% aramid 50% viscose FR 260 g/m²)
  • EN ISO 13688 : 2013
More about certification

Are you interested in a similar suit?

Our team of experts can provide you with personalised advice. Contact our Sioen Fire team to find out more about the possibilities.

Similar fire suits