Paris Long Term Operation

Assembly: 830 - Square

This special Paris firefighter team consists of experienced firemen who intervene in extreme conditions. Extreme conditions mean extreme danger. It calls for maximal protection.The four requirements for this suit are the same as the red Paris Fire Brigade suit: thermal protection optimisation, visibility maximisation, heat stress reduction and ergonomics improvement. In addition, a rescue system had to be included on the jacket and trousers to facilitate the extraction of firemen if necessary. The same 830 Square assembly was used as for the Paris Fire Brigade but in gold colour.

Material assembly 830 - Square

The 830 Square assembly provides excellent protection during flashovers, (when the outershell is exposed to high temperatures, the fabric thickens instantly, creating additional air space and thus improving the protection of the firefighter.) In addition, this assembly provides thermal insulation and a significant reduction of heat stress. At the same time, it is waterproof, breathable and comfortable. It was especially designed for the Fire Brigade of Paris. This innovative product protects every BSPP firefighter on a daily basis.

  1. Square
  2. SIO-A.I.R. PTFE
  3. Techweave
Read more

Technical specifications

Firefighter jacket
Reference: 2FF9F0PYS

This gold firefighter jacket offers the same protection as the Paris Fire Brigade suit, but a removable hood was added. It can cover the helmet and increases escape time. In addition, to be able to help other firefighters more easily, a drag and rescue device was added on the collar. The jacket has same high visibility striping as the BSPP suit.


  • Straight collar
  • Detachable hood
  • Anti-panic zipper under flap with touch & close fastening
  • 2 patched gusset pockets with flap, touch and close fastening and loop with D-buckle
  • 1 Napoleon pocket
  • 4 radio loops
  • 1 key pocket
  • Round inset ergonomic sleeves
  • FTP2100 striping
  • Extended back
  • Knitted cuffs in sleeves with thumb loop
  • 1 inside pocket
  • Wickingstrip at sleeve end and at hem
  • Air tubes top back & front + on shoulders for additional air-layer

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1: 2006 / Xf2 Xr2 Y2 Z2
  • EN ISO 13688 : 2013
More about certification

Firefighter trousers
Reference: 2FN9F0PYS

The trousers, made from the 830 Square assembly, provide good thermal protection, are waterproof and breathable. Heat stress is a common problem in high risk environments. The assembly was designed to protect the fireman from the risk of heat stress. However, in case of an accident, a rescue device on the inside of the legs can be used to drag the injured fireman away from any danger.


  • Front fly with touch and close fastening
  • 2 patched pockets with gusset
  • 1 key pocket
  • Hem reinforced with coated Kevlar®
  • Pre-shaped knees
  • Elasticated waist
  • Adjustable and removable braces
  • Knees reinforced with foam and coated and cut resistant Kevlar®
  • Rescue system on the back of each knee
  • FTP2100 striping
  • Wickingstrip at bottom of trousers

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1: 2006 / Xf2 Xr2 Y2 Z2
  • EN ISO 13688 : 2013
More about certification

Are you interested in a similar suit?

Our team of experts can provide you with personalised advice. Contact our Sioen Fire team to find out more about the possibilities.

Similar fire suits