Skip to navigation Search

Paris Fire Brigade

Assembly: 830 - Square

The Paris Fire Brigade (BSPP) asked to optimise the safety of its men. That includes thermal protection by increasing their escape time, maximising visibility, reducing heat stress and improving ergonomics. The colour of the BSPP’s garments, the third largest fire brigade in the world, used to be blue. Thanks to thorough research on visibility, Sioen Fire suggested to change to red, which they did. Over 9.000 firemen are now using this suit. You might have seen firefighters wearing this suit on footage of the Notre Dame fire.

Specs Contact us
Straight collar
Straight collar
Anti-panic zipper under flap with touch & close fastening
Anti-panic zipper under flap with touch & close fastening
4 radio loops
4 radio loops
Knitted cuffs in sleeves with thumb loop
Knitted cuffs in sleeves with thumb loop
2 patched pockets with gusset
2 patched pockets with gusset
Knees reinforced with foam and coated and cut resistant Kevlar<sup>®</sup>
Knees reinforced with foam and coated and cut resistant Kevlar®

Material assembly 830 - Square

The 830 Square assembly provides excellent protection during flashovers, (when the outershell is exposed to high temperatures, the fabric thickens instantly, creating additional air space and thus improving the protection of the firefighter.) In addition, this assembly provides thermal insulation and a significant reduction of heat stress. At the same time, it is waterproof, breathable and comfortable. It was especially designed for the Fire Brigade of Paris. This innovative product protects every BSPP firefighter on a daily basis.

  1. Square
  2. SIO-A.I.R. PTFE
  3. Techweave
Read more

Technical specifications

Firefighter jacket
Reference: 2FF5F0PYS

The BSPP jacket now has less retroreflective striping, but it is used more efficiently. Thanks to the prismatic retroreflective striping with reinforced seams, the BSPP firemen are more visible in rainy weather. It complies with the EN ISO 20471 high visibility standard. Not only the striping and colour are new, but also the fabric and sizing.

Details

  • Straight collar
  • Anti-panic zipper under flap with touch & close fastening
  • 2 patched gusset pockets with flap, touch and close fastening and loop with D-buckle
  • 4 radio loops
  • 1 Napoleon pocket
  • Round sleeves
  • Sleeve narrowing by touch and close fastening
  • Shoulder reinforcement with foam
  • Bottom of the jacket and sleeves are reinforced with coated and cut resistant Kevlar®
  • FTP2100 striping
  • Extended back
  • Knitted cuffs in sleeves with thumb loop
  • 1 inside pocket
  • Air tubes top back & front + on shoulders for additional air-layer
  • Wickingstrip at sleeve end and at hem
  • Zipper in back lining for inspection

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1: 2006 / Xf2 Xr2 Y2 Z2
  • EN ISO 13688 : 2013
More about certification

Firefighter trousers
Reference: 2FW5F0PYS

The 830 complex was especially designed for the BSPP firefighter suit. It provides very good protection against flashovers, as the fabric creates an air bubble to protect the firefighter. The jacket and trousers are the result of an excellent collaboration between the Paris Fire Brigade and our Sioen Fire specialised departments.

Details

  • Front fly with touch and close fastening
  • 2 patched pockets with gusset
  • 1 key pocket
  • Hem reinforced with coated Kevlar®
  • Pre-shaped knees
  • Elasticated waist
  • Adjustable and removable braces
  • FTP2100 striping
  • Wickingstrip at bottom of trousers

Certified to

  • EN 1149-5 : 2008
  • EN 469 : 2005 + A1 : 2006 / Xf2 Xr2 Y2 Z2 in association with TSI pants (50% aramide 50% viscose FR 260 g/m²)
  • EN ISO 13688 : 2013
More about certification

Are you interested in a similar suit?

Our team of experts can provide you with personalised advice. Contact our Sioen Fire team to find out more about the possibilities.

Contact us

Similar fire suits